How to Troubleshoot and also Fix an Electric Water Heater

Schedule A Service

How do you actually feel about What Would Cause My Electric Water Heater to Stop Working??



Lots of contemporary homes make use of an electrical hot water heater for their heating unit, due to its convenience and also simplicity of use. Nevertheless, just like any other electric home appliances, issues may emerge with its usage, unexpectedly. It can be actually discouraging to get up to a cold shower as opposed to a warm one or having your bath with water that isn't warm sufficient or even also warm. Whatever the case might be, water heater problems can be fairly stressful. Fortunately, we have actually made a listing of possible options to your water heater concerns. There are a variety of factors that can trigger many of these issues, it could be a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, ensure you shut off the main power supply for safety and security. Whatever the problem is, getting it taken care of ought to not posture excessive of a concern if you comply with these actions:

Call An Expert:


If after changing all malfunctioning parts as well as resetting your temperature, the hot water heater still isn't working, you might need to speak to an expert plumber for a specialist opinion. The trouble with your heater could be that the cold and hot faucets have been switched over or it may be undersized for the quantity of warm water needed in your house. Whatever the case might be, a specialist plumber would aid solve the issue.

Examine Your Power Supply:


As basic as this might appear, it is very needed. Without adequate power, your hot water heater will not work. So the first thing to do when your water instantly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the breaker stumbled. If the circuit breaker is the problem, merely turn it off and on once again. Change any damaged or damaged fuse. Examine the appliance with power after these modifications to see if it's currently functioning.

Check Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't hot enough, you may require to examine the temperature settings on your upper thermostat. Make sure the breaker is turned off before doing anything. Open the gain access to panel and also press the red switch for temperature level reset above the thermostat. This ought to assist warm the water. Transform the breaker back on and check if the issue has actually been solved.

Examine the Burner in the Water Heater:


If it's not a power problem, then try taking a look at your heating element if it is still functioning. Check each of your heating elements to make sure the issue isn't with any one of them. If any one of them is malfunctioning, change that component and afterwards examine whether the warm water is back on.

Verdict


Hot water heater troubles are not constantly significant. Many of them are due to minor issues like a blown fuse or worn-out heating element. Replacing the faulty parts should do the trick. However, if you are still unable to solve the problem, give a call to your nearest plumber to come to get it fixed.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


How to Troubleshoot and Repair an Electric Water Heater

Hopefully you enjoyed reading our post about What Would Cause My Electric Water Heater to Stop Working?. Thanks so much for taking time to read through our piece. Sharing is caring. One never knows, you might be doing someone a favor. Thanks a lot for taking the time to read it.




Schedule An Appointment

Leave a Reply

Your email address will not be published. Required fields are marked *